Australia market is always a high standard and strict market for equipment, and GN Solids Control has been a stable supplier to Australia market for more than 10 years because of the high quality of GN equipment and the stable performance. Just recently, GN Solids Control has provided to Australia following equipment for one jobsite:

1. Linear motional drying shaker GNLMZ1236. It can be regarded as a coarse shaker with comparably larger screen holes in order to remove the large stones or obstacles from the slurry.

2. Double deck shale shaker GNZS706. It is a shale shaker equipped by 2 shaker decks, each deck has 3 piece of shaker screens. On upper and lower deck, the screens are of different API numbers, it can be regarded as a 2 steps separation. So the treating capacity is larger than a single deck one, so is the separating performance. The shaker here is used to remove all particles larger than 100 microns.

3. Mud cleaner GNZJ703. Mud cleaner is a combination of desander and desilter cones, which also share a same drying shaker on below. The desander cones and desilter cones are used for respectively 40 microns and 20 microns particle separation.

4. Decanter centrifuge GNLW553. GNLW553 is a VFD controlled big bowl centrifuge with a designed capacity of 90 cbm per hour. By larger rotating bowl speed, the centrifuge can efficienty remove particles from 2 to 5 microns.

5. Chemical doings system. When the particle sizes are even too small for the decanter centrifuge, a chemical dosing system is necessary now. Cause by adding polymer into the medium, the extra fine particles can flocculate into larger ones, in order to be separated by a decanter centrifuge. Both GNLW553 centrifuge and chemical dosing are designed inside containers for easy transportation and operation.

GN Solids Control is capable of making customized designs based on jobsite need. Welcome to contact GN directly.