By end of year 2020, GN Solids Control has another set of mud system ready for delivery for a domestic engineering company in China. It is a high configuration mud system. Including following:

1. Mud recycling system: GNMS-1000D and GNMS-500D are two models of GN compact mud systems, which are also quite popular. The complete system is designed on one skid, combined by a double deck shaker. The mud to be treated will be transferred by a pump to the lower deck shaker, and the lower deck shaker plays the role as a shale shaker for the 1st step separation. Then the treated mud falls into the catch tank below shaker, also on the same skid. Then, a centrifugal pump on the same mud system will suck the mud from catch tank to the desanding cone on top of shaker. And there is a upper shaker deck for drying the solids discharged from the cyclones. The clean mud will enter another container or tank outside the mud unit.

2. Dewatering centrifuge: If the mud need to be further treated, the client could use a decanter centrifuge for dewatering, together with chemical dosing unit. GNLW554E-VFD is quite a suitable model with a big bowl of 18 inch and a long bowl length diameter ratio of 4. A VFD control panel enables the centrifuge to have different speed options for an ideal treating capacity.

3. Mud mixing and storage system: after the physical and chemical separation, there could be some component loss in the drilling mud, and those components should be compensated by a mud mixing unit, with a mixing hopper and mixing pump. And the well prepared mud should be put in a storage tank for future use.

Welcome to consult GN for more information.