GN Solids Control is a famous brand for not only drilling rig solids control industry, but also for other industries like mining and construction projects for the mud treatment.

Just weeks ago, GN Solids Control has got an order for a series of equipment for an Australia Construction company, and the equipment they purchased are as below:

1. Linear motional drying shaker for mining. This is a strong shale shaker with gap screens for coarse separation. It uses screens with large openings to remove the big particles or stones.

2. High G force linear motional shale shakers. This model of shale shakers are using finer shaker screens than the dewatering shaker, by using shaker screens of different API numbers, those shale shakers can remove particles around 100 microns.

3. Desilter cyclones. The desilter cyclones are using the centrifugal G force to splash the liquid phase to the top of cyclone and the solids phase will fall from the bottom of cyclone. A desilter cyclone can remove particles above 20 microns.

4. Decanter centrifuge. It is the last phase for separation. It is a big bowl centrifuge for large treating capacities and the high speed rotating centrifuge bowl can remove particles from 2 to 5 microns.

In the past several years, GN Solids Control has provided such equipment to many jobsites in different countries, which are proved to be both practical and economical. For the shale shakers, GN has different models including mining shale shaker, mini shale shaker, single deck shale shaker and double deck shakers. For the decanter centrifuge, GN has baby centrifuge with as small as 9 inch diameter bowl and up to 30 inch diameter bowl. Besides, GN can provide turn-key solution including feeding pumps and conveyors.

Based on your specific jobsite requests, GN can give customized solution. Welcome to contact GN directly.