As leading brand for separation solution provider, most of GN Solids Control’s equipment are being used for oil and gas industry, like the solids control system, drilling waste management and oily sludge treatment fields. But still, GN equipment are quite widely used for non-oil and gas industry, for HDD projects, Tunnel Boring, CBM and etc. Just recently, several equipment are ready for delivery for some non-oil and gas industry clients.
This mud recycling unit is also called desanding unit, which is used mostly for tunnel boring, pipe jacking projects. By using a shaker on lower deck with screen mesh of 10 or 20, large particles are separated out while liquid part falls into the catch tank below the shaker. Then, the fluids will be transferred by a centrifugal pump to the desander cyclones one top of shaker, and the discharged solids from the cyclone will be further separated by a drying shaker deck on top of the shaker. Then the clean mud is splashed out from desander cone to outside of unit.
For this mud recycling unit, GN Solids Control has 3 models, for serving different treating capacity as 200GPM, 500GPM and 1000GPM.
- GN Self Contained Mud recycling system:
This system is mostly used in big HDD project, with a complete mud recycling procedures including shale shaker, desander cones or/and desilter cones, and a mud mixing unit for adding chemicals into the cleaned mud. Here the shale shaker is used to separate out the particles larger than 100 microns, desanding cones for particles larger than 40 microns while the desilter for 20 microns. For this system, GN provides different capacity options as 200GPM, 350GPM, 500GPM and 1000 GPM. Based on different storage capacity, there are 2 optional tank sizes respectively for 500GPM and 1000GPM mud system.
For more information, welcome to contact GN directly.